C
Codeman
Forum Benutzer
8990
Hallo!
Ich muss leider noch auf meinen D610 warten, er sollte nächste Woche kommen, vielleicht geht sichs vor meinem Urlaub noch aus.
Ich habe gesehen, dass es seit Montag eine neue Bios-Version gibt, hat die schon jemand installiert? Weil Punkt 7 könnte vielleicht interessant sein. Hier die Details:
Systems: Dell Latitude D610 Series
Version: A04
Build Date: 06/29/2005
Intel 915GM Graphics Video BIOS version 1219
ATI Mobility Radeon X300 Video BIOS version 8.017M.192.062
Issues Fixed:
=============
1. Fixed issue where hotplugged IDE drives would be not be programmed to
the optimal transfer mode.
2. Fixed issue in which Windows intermittently reports an "unexpected error"
when the BIOS flash program is launched, which prevents the BIOS
update from occurring.
3. Fixed issue where BIOS Setup reports the RAM size incorrectly on the next
boot after corrupting CMOS.
4. Fixed intermittent problem where, after the user creates a hard disk
password with an Admin password already installed, the Admin password
will not unlock the hard disk on subsequent boots. The Admin password
should unlock the hard disk password in this situation.
5. Fixed performance problem seen when running Microsoft Virtual PC.
6. Optimized CD-ROM timing for DOS mode transfers.
7. Reduced potential headphone noise.
Enhancements:
=============
1. Added support for warm undocking System Setup option. The undock method
can be configured as either "Hot Undock" or "Warm Undock" using the
new "Undocking Method" field in System Setup. The system must be
rebooted after changing this field. Previously, the system would only
allow hot-undocking. When warm-undocking, the system enters Standby
mode if the dock eject button is pressed or the user commands the
Operating System to undock the computer from the Start Menu.
The default behavior is Hot Undock. This allows the system
to stay powered on when undocking.
PLEASE NOTE: Regardless of how "Undocking Method" is configured,
the user must notify the system before undocking by either pressing
the dock eject button or commanding the OS to undock the computer
from the Start Menu.
2. Add support for newer versions of the Intel Pentium M processor.
3. Upgraded ATI VBIOS
4. Upgraded Intel VBIOS to version 1219, which provides enhanced graphics
performance.
5. Upgraded ATI VBIOS to version 8.17M.192.062 to optimize performance.
6. Upgraded Broadcom PXE rom version and added an RPL boot option to the
BIOS one-time boot menu.
7. Added support for INT 13 DMA transfers (under DOS) when operating in
protected mode. This is specifically meant to address a performance
issue seen by some customers who are running Ghost under DOS in
protected mode.
editiert von: Codeman, 13.07.2005, 14:56 Uhr
Hallo!
Ich muss leider noch auf meinen D610 warten, er sollte nächste Woche kommen, vielleicht geht sichs vor meinem Urlaub noch aus.
Ich habe gesehen, dass es seit Montag eine neue Bios-Version gibt, hat die schon jemand installiert? Weil Punkt 7 könnte vielleicht interessant sein. Hier die Details:
Systems: Dell Latitude D610 Series
Version: A04
Build Date: 06/29/2005
Intel 915GM Graphics Video BIOS version 1219
ATI Mobility Radeon X300 Video BIOS version 8.017M.192.062
Issues Fixed:
=============
1. Fixed issue where hotplugged IDE drives would be not be programmed to
the optimal transfer mode.
2. Fixed issue in which Windows intermittently reports an "unexpected error"
when the BIOS flash program is launched, which prevents the BIOS
update from occurring.
3. Fixed issue where BIOS Setup reports the RAM size incorrectly on the next
boot after corrupting CMOS.
4. Fixed intermittent problem where, after the user creates a hard disk
password with an Admin password already installed, the Admin password
will not unlock the hard disk on subsequent boots. The Admin password
should unlock the hard disk password in this situation.
5. Fixed performance problem seen when running Microsoft Virtual PC.
6. Optimized CD-ROM timing for DOS mode transfers.
7. Reduced potential headphone noise.
Enhancements:
=============
1. Added support for warm undocking System Setup option. The undock method
can be configured as either "Hot Undock" or "Warm Undock" using the
new "Undocking Method" field in System Setup. The system must be
rebooted after changing this field. Previously, the system would only
allow hot-undocking. When warm-undocking, the system enters Standby
mode if the dock eject button is pressed or the user commands the
Operating System to undock the computer from the Start Menu.
The default behavior is Hot Undock. This allows the system
to stay powered on when undocking.
PLEASE NOTE: Regardless of how "Undocking Method" is configured,
the user must notify the system before undocking by either pressing
the dock eject button or commanding the OS to undock the computer
from the Start Menu.
2. Add support for newer versions of the Intel Pentium M processor.
3. Upgraded ATI VBIOS
4. Upgraded Intel VBIOS to version 1219, which provides enhanced graphics
performance.
5. Upgraded ATI VBIOS to version 8.17M.192.062 to optimize performance.
6. Upgraded Broadcom PXE rom version and added an RPL boot option to the
BIOS one-time boot menu.
7. Added support for INT 13 DMA transfers (under DOS) when operating in
protected mode. This is specifically meant to address a performance
issue seen by some customers who are running Ghost under DOS in
protected mode.
editiert von: Codeman, 13.07.2005, 14:56 Uhr