Vaio CR cr31z7n auf win xp

S

Silvr

Forum Newbie
CR 31Z/N auf Win Xp?

Hallo,

ich bin gerade am verzweifeln...

Für einen Bekannten soll ich sein neues NB auf Win Xp Downgraden.

Ist auch schon drauf, doch leider komm ich an ein paar Xp Treiber nicht heran...

Habe es auch schon mit Everest und Aida probiert, doch leider komm ich auch damit nicht weiter :(

folgende Treiber fehlen noch:
BCM2046 BT Device
Ethernet Controller
Massenspeichercontroller
Netzwerkcontroller
PCI Device
SM Bus Controller
Videocontroller (vga- kompatibel)


Es wäre echt schön, wenn mir jemand nur die vorhandenen Modellbezeichnungen geben könnte, dann wäre es mit den Treibern auch nicht das Problem.

Vielen Dank

P.S. Sony bietet für dieses Modell leider kein Downgrade an, weiss jemand warum?
Kann ich alles mit Standard Treibern probieren?

P.S.S.

Die Hardware Tasten gehen dann gar nicht, oder? Die m´üssen ja direkt mit XP Software von Sony angesprochen werden, und die gibt es leider nicht...
 
Zuletzt bearbeitet:
Wenns damit ohne probleme klappen sollte gib nochmal bescheid, besitzte dasselbe Notebook....
 
Also damit geht es leider auch nicht... ich werde jetzt wieder vista raufhauen und die originaltreiber nehmen...

schade schade, denn mit xp wäre das NB der Hammer gewesen ;)
 
@ silvr

Sorry das ist aber Blödsinn. Natürlich klappt das.
Man muss nur der Installation Anleitung folgen.

Bei mir hat es geklappt.

Bitte lesen (kein Spam :) )

1) Make sure the Wireless switch on the front side of the unit is switched on.

2) Install Windows XP Professional with SP2

3) When running the windows setup, please select to install on the second partition and leave the recovery partition in tact, this allows you to go back to the preinstalled Windows Vista by pressing F10 at the Sony logo. If you wish to also include this partitioned space to your Windows XP installation, please make sure to first create the recovery discs using the recovery utility in Vista.

4) When the windows XP setup is complete enter windows, go to the Applications folder on your hard disk.
Install the utilities in the correct order. Starting with Utilities folder 1
a. When during the setup the system asks to reboot, please do so and continue with the next folder when back in windows.
b. When installing the Vaio Event Service, please select the typical install
c. When installing the optional Infineon TPM package, please use the Infineon TPM professional Package file to start the installation, and not the Setup file.

5) When the utilities are installed exit the applications folder and open the Drivers folder. Then open the Chipset folder to run the setup. When the setup is completed, press finish to restart the PC

6) Touchpad driver :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Mice and other pointing devices
e. Right click on the PS/2 Compatible mouse item and select Update driver
f. Select “No, not this time” and press Next
g. Select “Install from a specific location” and press Next
h. Click on Browse and browse to the Drivers folder and select there the Pointing folder and press Ok
i. Click on Next
j. Click on Finish when done
k. Restart the PC

7) Audio driver installation :
a. After the reboot, open the Drivers folder, then the audio folder, open folder 1 and run the “KB835221 – Audio hotfix” file and follow the install instructions.
b. 2 Found new hardware dialogs will pop up. Press cancel on these screens
c. Press finish on the KB835221 setup wizard screen
d. Go back out of folder 1 and open folder 2
e. Run the setup file in this folder. Follow the on-screen instructions.

8) A Found new hardware dialog will appear after the reboot (Modem installation).
a. Select No, not this time and press next
b. It will want to install a Modem device. Select “Install from a list of specific location” and press next
c. Select “Search for the best driver in these locations”
d. Deselect “Search removable media”
e. Select “include this location in the search”. Press on browse and browse to the modem folder in the Drivers folder and press OK
f. Click on next to continue
g. Press on Finish to complete the installation

9) Bluetooth installation :
a. Exit the Folder 2 and the Audio subfolder and open the Bluetooth folder
b. Run the setup program. Follow the on-screen instructions
c. Reboot the PC when requested at the end of the installation
d. After the reboot the Vaio will install some more devices, these are the sounds you will be hearing. This will stop after +- 30 sec

10) Graphics installation :
Depending on your model a different driver needs to be installed and a different setup process needs to be followed.

a. When you have the following model with the ATI graphics card : VGN-BX41VN, please follow these steps :
a) Browse to the Drivers folder and open the Graphics ATI folder.
b) Please run the setup file in this folder and follow the on-screen instructions.

b. When you have the following model with the Intel integrated Graphics : VGN-BX41XN, please follow these steps:

a) Go to Start > Control Panel
b) Select Switch to classic view
c) Double click on “System”
d) Click on the tab Hardware and press on Device manager
e) In the List with ? Other devices, right-click on the Video Controller (VGA compatible) and select update driver
f) Select “No, Not this time” and press Next
g) Select “Install from a list or specific location” and press Next
h) Deselect “Search removable media”
i) Select “include this location in the search”. Press on browse and browse to the Drivers folder. Then browse to the Graphics Intel folder
j) Press Next

The screen might flash a couple of times during the installation, this is normal. Wait until the setup is completed and press Finish at the end of the install. Do not click any other screens during the installation! Restart the PC when done.

11) Wireless LAN drivers installation:
a. Browse to the folder Drivers and then open the WirelessLAN folder
b. Double click the to start the setup
c. Select Install Software
d. Select, after licence Agreement, “Typical” and press Next
e. Press Ok when the install is completed
f. Press Ok and restart the PC.

Other drivers installations :

Open the Device manager :
g. Go to Start > Control Panel
h. Double click on “System”
i. Click on the Hardware tab and click on “Device Manager”

12) Network controller driver installation:
a. Right click on the Ethernet Controller item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Ethernet folder and press Ok
e. Click on Next
f. Click on Finish when done


13) Mass Storage controller (Memorystick):
a. Right click on the Mass Storage Controller item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Memory Card ReaderWriter folder and press Ok
e. Click on Next
f. Click on Finish when done
14) Memory stick Icon installation
a. Browse to the folder Drivers and then Memorystick Icon
b. Run the setup in the folder


15) TPM module installation
a. Right click on the Unknown device item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the TPM folder and press Ok
e. Click on Next
f. Click on Finish when done

16) Camera driver installation :
a. Click on the + before Imaging devices
b. Right click on “USB Video Device” and select Update driver
c. Select in the Wizard “No, not this time” and press Next
d. Select “Install from a list or a specific location” and press Next
e. Select “Don’t search, I will choose the driver to install” and press Next
f. Press on “Have Disk…”
g. Browse to the folder Drivers and then Camera and press Open
h. Click on the file R5U870FL and press Open
i. Click on OK
j. Click Next and select “Continue Anyway” on the warning screen
k. Press Finish when done.

17) Camera driver installation :
a. Click on the + before Human interface devices
b. Right click on “Sony Notebook Interface Device” and select Update driver
c. Select in the Wizard “No, not this time” and press Next
d. Select “Install from a list or a specific location” and press Next
e. Select “Don’t search, I will choose the driver to install” and press Next
f. Press on “Have Disk…”
g. Browse to the folder Drivers and then SNC and press Open
h. Click on the file SonyNC and press Open
i. Click on OK
j. Press Finish and reboot the PC when done.

18) Support driver :
a. Go to the drivers folder, then open the Serial port folder
b. Right-click on the file and select install.
c. Exit the serial port folder and open the Sony image filter
d. Run the install file, on the pop-up select ‘Continue anyway’

This completes the XP downgrade setup.
 
Und das ist auch für das CR 31Z/N????

und die Treiber sind eigentlich CR 21Z/N?!?

Dann werde ich das nochmal in Angriff nehmen ;)
 
@ silvr


da haste recht. :)

Musst natürlich auf downgrade, aber ohne die entsprechen Seriennr. geht das nicht.

Selbst wenn Du diese hättest, könntest Du nur die Treiber runterladen, den die Utilitys werden für dieses Modell nicht bereitgestellt.

O-Ton Sony

( For your Vaio we have released only the XP. There are no plans to release any other applications or utilities (like hotkey applications, power management etc) for XP.)

1) Please makes sure that :
a. The unit is connected on AC power
b. The Wireless switch on the left side of the unit is switched on.
c. No 3rd party hardware is connected / installed on the unit when starting this process.

2) Install Windows XP Professional with SP2
! Important notes :
a. In case you still would like to recover using F10 from the hard disk to the original Vista preinstalled operating system, please leave the recovery partition in tact.
b. In case you would like to free up some space and remove the recovery partition, please make sure to first create a set of recovery discs using the Recovery wizard in your Vista preinstalled installation.
c. We recommend to quick format the partition you wish to install Windows XP on to avoid conflicts with the preinstalled OS.

3) Open the downloaded Drivers folder. Then open the Chipset folder to run the setup. Follow the on-screen instructions, when the setup is completed, press finish to restart the PC

4) Audio driver installation :
a. After the reboot, open the Drivers folder, then the audio folder, open folder 1 and run the “KB835221 – Audio hotfix” file and follow the install instructions.
b. 2 Found new hardware dialogs will pop up. Press cancel on these screens
c. Press finish on the KB835221 setup wizard screen
d. Go back out of folder 1 and open folder 2
e. Run the setup file in this folder. Follow the on-screen instructions.
f. Restart the system when prompted to.

5) A Found new hardware dialog will appear after the reboot (Modem installation).
a. Select No, not this time and press next
b. It will want to install a Modem device. Select “Install from a list of specific location” and press next
c. Select “Search for the best driver in these locations”
d. Deselect “Search removable media”
e. Select “include this location in the search”. Press on browse and browse to the modem folder in the Drivers folder and press OK
f. Click on next to continue
g. A Pop-up will appear, please press on “Continue Anyway”
h. Press on Finish to complete the installation

6) Bluetooth installation :
a. Open the Drivers folder and open the Bluetooth folder
b. Run the setup program. Follow the on-screen instructions
c. Reboot the PC when requested at the end of the installation
d. After the reboot you might hear some sounds, this is from installing further Bluetooth components, please ignore this.

7) Graphics installation :
a) Open the Video folder
b) Run the setup file from the folder
c) Reboot when finished

8) Wireless LAN drivers installation:
a. Browse to the folder Drivers and then WirelessLAN
b. Double click on the iProInst icon to start the setup
c. Select Install Software
d. Select, after licence Agreement, “Typical” and press Next
e. Press Ok on the “Install default components?”
f. Press Ok when the install is completed

Other drivers installations :

Open the Device manager :
g. Go to Start > Control Panel
h. Double click on “System”
i. Click on the Hardware tab and click on “Device Manager”

9) Network controller driver installation:
a. Right click on the Ethernet Controller item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Network folder and press Ok
e. Click on next and select “Continue Anyway” on the warning screen
f. Click on Finish when done

10) Mass Storage controller (Memorystick):
a. Right click on the first Base system device item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Memory card ReaderWriter folder and press Ok
e. Click on Next
f. Click on Finish when done

11) Memorystick icon patch
a. Open the folder Memory card ReaderWriter Registry Patch
b. Run the setup file in there

12) Touchpad driver :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Mice and other pointing devices
e. Right click on the PS/2 Compatible mouse item and select Update driver
f. Select “No, not this time” and press Next
g. Select “Install from a specific location” and press Next
h. Click on Browse and browse to the Drivers folder and select there the Pointing folder and press Ok
i. Click on Next
j. Click on Finish when done
k. Restart the PC

13) Camera driver installation:
a. Open the camera folder
b. Run the install file from that folder
c. Press “Continue Anyway” 2X on the warning screens
d. During the installation you might receive an error message, press OK to continue

14) Notebook control driver installation :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Human interface devices
e. Right click on “Sony Notebook Interface Device” and select Update driver
f. Select in the Wizard “No, not this time” and press Next
g. Select “Install from a list or a specific location” and press Next
h. Select “Don’t search, I will choose the driver to install” and press Next
i. Press on “Have Disk…”
j. Browse to the folder Drivers and then SonyNC and press Open
k. Click on the file SonyNC and press Open
l. Click on OK
m. Press Finish and reboot the PC when done.

15) Sony Image filter:
a. Open the folder Sony Image Filter
b. Run the Install file

This completes the XP downgrade setup.
Important note : DVD playback is not natively supported in Windows XP, so a separate program is needed in order to playback DVD movies. This software will not be supplied by Sony.

Kannst aber versuchen die Utilitys von der RecoveryCD von Vista benutzen, könnte klappen.... :)
 

Ähnliche Themen

Acer Aspire ES1-311 mit Windows 7 ?!

Vaio EB Audiogeräte und USB werden nicht erkannt Sony vaio win 7

Asus 900HD Treiber für Lan XP - keiner funktioniert!

Vaio (diverse) FW21J und Windows XP

Vaio FW Win 7 Installation auf Sony Vaio Notebook geht nicht

Zurück
Oben