OpenVPN Konfigurationsfragen(Server-Client)

Diskutiere OpenVPN Konfigurationsfragen(Server-Client) im Allgemeine Softwarethemen Forum im Bereich Sonstige Themen; Hallo! Hab mal auf mein PC OpenVPN installiert. Danch die *.bat Dateien ausgeführt und konfiguriert. Doch wenn ich auf dem Server mich...

  1. #1 Sykwitit, 07.10.2009
    Sykwitit

    Sykwitit Forum Master

    Dabei seit:
    06.02.2006
    Beiträge:
    840
    Zustimmungen:
    0
    Ort:
    Linz
    Mein Notebook:
    Acer TM432LC | Sony VAIO FE11M
    Hallo!

    Hab mal auf mein PC OpenVPN installiert.
    Danch die *.bat Dateien ausgeführt und konfiguriert.

    Doch wenn ich auf dem Server mich verbinden möchte erhalte ich folgende Meldung:

    Options error: Unrecognized option or missing parameter(s) in server.ovpn:25: 192.169.1.100 (2.0.9)


    Aktuelles Netzwerk:
    Internet -- Router -- PC (192.168.1.100 255.255.255.0)

    Beim Router hab ich den Port Freigegeben (TCP+UDP).

    FEHLERMELDUNG bei server.ovpn:
    Options error: Unrecognized option or missing parameter(s) in C:\Program Files (
    x86)\OpenVPN\config\server.ovpn:25: 192.169.1.100 (2.0.9)


    Fehlemeldung wenn ich über OVPNGUI mich vebinde
    Options error: Unrecognized option or missing parameter(s) in server.ovpn:25: 192.169.1.100 (2.0.9)
    Use --help for more information.


    Config File
    Code:
    #################################################
    # Sample OpenVPN 2.0 config file for            #
    # multi-client server.                          #
    #                                               #
    # This file is for the server side              #
    # of a many-clients <-> one-server              #
    # OpenVPN configuration.                        #
    #                                               #
    # OpenVPN also supports                         #
    # single-machine <-> single-machine             #
    # configurations (See the Examples page         #
    # on the web site for more info).               #
    #                                               #
    
    # This config should work on Windows            #
    # or Linux/BSD systems.  Remember on            #
    # Windows to quote pathnames and use            #
    # double backslashes, e.g.:                     #
    # "C:\\Program Files\\OpenVPN\\config\\foo.key" #
    #                                               #
    # Comments are preceded with '#' or ';'         #
    #################################################
    
    # Which local IP address should OpenVPN
    # listen on? (optional)
    192.169.1.100
    
    # Which TCP/UDP port should OpenVPN listen on?
    # If you want to run multiple OpenVPN instances
    # on the same machine, use a different port
    # number for each one.  You will need to
    # open up this port on your firewall.
    port 1194
    
    # TCP or UDP server?
    ;proto tcp
    proto udp
    
    # "dev tun" will create a routed IP tunnel,
    # "dev tap" will create an ethernet tunnel.
    # Use "dev tap0" if you are ethernet bridging
    # and have precreated a tap0 virtual interface
    # and bridged it with your ethernet interface.
    # If you want to control access policies
    # over the VPN, you must create firewall
    # rules for the the TUN/TAP interface.
    # On non-Windows systems, you can give
    # an explicit unit number, such as tun0.
    # On Windows, use "dev-node" for this.
    # On most systems, the VPN will not function
    # unless you partially or fully disable
    # the firewall for the TUN/TAP interface.
    ;dev tap
    dev tun
    
    # Windows needs the TAP-Win32 adapter name
    # from the Network Connections panel if you
    # have more than one.  On XP SP2 or higher,
    # you may need to selectively disable the
    # Windows firewall for the TAP adapter.
    # Non-Windows systems usually don't need this.
    ;dev-node MyTap
    
    # SSL/TLS root certificate (ca), certificate
    # (cert), and private key (key).  Each client
    # and the server must have their own cert and
    # key file.  The server and all clients will
    # use the same ca file.
    #
    # See the "easy-rsa" directory for a series
    # of scripts for generating RSA certificates
    # and private keys.  Remember to use
    # a unique Common Name for the server
    # and each of the client certificates.
    #
    # Any X509 key management system can be used.
    # OpenVPN can also use a PKCS #12 formatted key file
    # (see "pkcs12" directive in man page).
    ca ca.crt
    cert server.crt
    key server.key  # This file should be kept secret
    
    # Diffie hellman parameters.
    # Generate your own with:
    #   openssl dhparam -out dh1024.pem 1024
    # Substitute 2048 for 1024 if you are using
    # 2048 bit keys. 
    dh dh1024.pem
    
    # Configure server mode and supply a VPN subnet
    # for OpenVPN to draw client addresses from.
    # The server will take 10.8.0.1 for itself,
    # the rest will be made available to clients.
    # Each client will be able to reach the server
    # on 10.8.0.1. Comment this line out if you are
    # ethernet bridging. See the man page for more info.
    server 192.168.0.0 255.255.255.0
    
    # Maintain a record of client <-> virtual IP address
    # associations in this file.  If OpenVPN goes down or
    # is restarted, reconnecting clients can be assigned
    # the same virtual IP address from the pool that was
    # previously assigned.
    ifconfig-pool-persist ipp.txt
    
    # Configure server mode for ethernet bridging.
    # You must first use your OS's bridging capability
    # to bridge the TAP interface with the ethernet
    # NIC interface.  Then you must manually set the
    # IP/netmask on the bridge interface, here we
    # assume 10.8.0.4/255.255.255.0.  Finally we
    # must set aside an IP range in this subnet
    # (start=10.8.0.50 end=10.8.0.100) to allocate
    # to connecting clients.  Leave this line commented
    # out unless you are ethernet bridging.
    ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
    
    # Push routes to the client to allow it
    # to reach other private subnets behind
    # the server.  Remember that these
    # private subnets will also need
    # to know to route the OpenVPN client
    # address pool (10.8.0.0/255.255.255.0)
    # back to the OpenVPN server.f
    push "route 192.168.1.0 255.255.255.0"
    ;push "route 192.168.20.0 255.255.255.0"
    
    # To assign specific IP addresses to specific
    # clients or if a connecting client has a private
    # subnet behind it that should also have VPN access,
    # use the subdirectory "ccd" for client-specific
    # configuration files (see man page for more info).
    
    # EXAMPLE: Suppose the client
    # having the certificate common name "Thelonious"
    # also has a small subnet behind his connecting
    # machine, such as 192.168.40.128/255.255.255.248.
    # First, uncomment out these lines:
    ;client-config-dir ccd
    ;route 192.168.40.128 255.255.255.248
    # Then create a file ccd/Thelonious with this line:
    #   iroute 192.168.40.128 255.255.255.248
    # This will allow Thelonious' private subnet to
    # access the VPN.  This example will only work
    # if you are routing, not bridging, i.e. you are
    # using "dev tun" and "server" directives.
    
    # EXAMPLE: Suppose you want to give
    # Thelonious a fixed VPN IP address of 10.9.0.1.
    # First uncomment out these lines:
    ;client-config-dir ccd
    ;route 10.9.0.0 255.255.255.252
    # Then add this line to ccd/Thelonious:
    #   ifconfig-push 10.9.0.1 10.9.0.2
    
    # Suppose that you want to enable different
    # firewall access policies for different groups
    # of clients.  There are two methods:
    # (1) Run multiple OpenVPN daemons, one for each
    #     group, and firewall the TUN/TAP interface
    #     for each group/daemon appropriately.
    # (2) (Advanced) Create a script to dynamically
    #     modify the firewall in response to access
    #     from different clients.  See man
    #     page for more info on learn-address script.
    ;learn-address ./script
    
    # If enabled, this directive will configure
    # all clients to redirect their default
    # network gateway through the VPN, causing
    # all IP traffic such as web browsing and
    # and DNS lookups to go through the VPN
    # (The OpenVPN server machine may need to NAT
    # the TUN/TAP interface to the internet in
    # order for this to work properly).
    # CAVEAT: May break client's network config if
    # client's local DHCP server packets get routed
    # through the tunnel.  Solution: make sure
    # client's local DHCP server is reachable via
    # a more specific route than the default route
    # of 0.0.0.0/0.0.0.0.
    ;push "redirect-gateway"
    
    # Certain Windows-specific network settings
    # can be pushed to clients, such as DNS
    # or WINS server addresses.  CAVEAT:
    # http://openvpn.net/faq.html#dhcpcaveats
    ;push "dhcp-option DNS 10.8.0.1"
    ;push "dhcp-option WINS 10.8.0.1"
    
    # Uncomment this directive to allow different
    # clients to be able to "see" each other.
    # By default, clients will only see the server.
    # To force clients to only see the server, you
    # will also need to appropriately firewall the
    # server's TUN/TAP interface.
    ;client-to-client
    
    # Uncomment this directive if multiple clients
    # might connect with the same certificate/key
    # files or common names.  This is recommended
    # only for testing purposes.  For production use,
    # each client should have its own certificate/key
    # pair.
    #
    # IF YOU HAVE NOT GENERATED INDIVIDUAL
    # CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
    # EACH HAVING ITS OWN UNIQUE "COMMON NAME",
    # UNCOMMENT THIS LINE OUT.
    ;duplicate-cn
    
    # The keepalive directive causes ping-like
    # messages to be sent back and forth over
    # the link so that each side knows when
    # the other side has gone down.
    # Ping every 10 seconds, assume that remote
    # peer is down if no ping received during
    # a 120 second time period.
    keepalive 10 120
    
    # For extra security beyond that provided
    # by SSL/TLS, create an "HMAC firewall"
    # to help block DoS attacks and UDP port flooding.
    #
    # Generate with:
    #   openvpn --genkey --secret ta.key
    #
    # The server and each client must have
    # a copy of this key.
    # The second parameter should be '0'
    # on the server and '1' on the clients.
    ;tls-auth ta.key 0 # This file is secret
    
    # Select a cryptographic cipher.
    # This config item must be copied to
    # the client config file as well.
    ;cipher BF-CBC        # Blowfish (default)
    ;cipher AES-128-CBC   # AES
    ;cipher DES-EDE3-CBC  # Triple-DES
    
    # Enable compression on the VPN link.
    # If you enable it here, you must also
    # enable it in the client config file.
    comp-lzo
    
    # The maximum number of concurrently connected
    # clients we want to allow.
    ;max-clients 100
    
    # It's a good idea to reduce the OpenVPN
    # daemon's privileges after initialization.
    #
    # You can uncomment this out on
    # non-Windows systems.
    ;user nobody
    ;group nobody
    
    # The persist options will try to avoid
    # accessing certain resources on restart
    # that may no longer be accessible because
    # of the privilege downgrade.
    persist-key
    persist-tun
    
    # Output a short status file showing
    # current connections, truncated
    # and rewritten every minute.
    status openvpn-status.log
    
    # By default, log messages will go to the syslog (or
    # on Windows, if running as a service, they will go to
    # the "\Program Files\OpenVPN\log" directory).
    # Use log or log-append to override this default.
    # "log" will truncate the log file on OpenVPN startup,
    # while "log-append" will append to it.  Use one
    # or the other (but not both).
    ;log         openvpn.log
    ;log-append  openvpn.log
    
    # Set the appropriate level of log
    # file verbosity.
    #
    # 0 is silent, except for fatal errors
    # 4 is reasonable for general usage
    # 5 and 6 can help to debug connection problems
    # 9 is extremely verbose
    verb 3
    
    # Silence repeating messages.  At most 20
    # sequential messages of the same message
    # category will be output to the log.
    ;mute 20
    
    Wo passt die Konfiguration des Servers nicht?
     
Thema: OpenVPN Konfigurationsfragen(Server-Client)
Besucher kamen mit folgenden Suchen
  1. Options error: Unrecognized option or missing or extra parameter(s) in server.ovpn:25: 192.168.1.233

  1. Diese Seite verwendet Cookies um Inhalte zu personalisieren. Außerdem werden auch Cookies von Diensten Dritter gesetzt. Mit dem weiteren Aufenthalt akzeptierst du diesen Einsatz von Cookies.
    Information ausblenden