800er laufen mit dem Intel Chipsatz nicht unbedingt zusammen, da die Verpflichtung seitens der DDR2-Richtlinie nur bis 667 MHz geht. Irgendwas war da...
Hey lexi!
Quatsch guck ma hier:
Dell Latitude E6400 - Produktinformationen
und es ist ja eh n Intel® 45 Express-Chipsatz
der unterstützt das.
Quelle Intel PDF Datasheet.
1.1 Intel® PM45 Express Chipset Feature Support
1.1.1 Processor
• Intel® Core™2 Extreme, Intel® Core™2 Quad, and Intel® Core™2 Duo mobile
processors based on the 45-nm process
• 667-MHz, 800-MHz and 1066-MHz FSB
• Source synchronous double-pumped (2x) address
• Source synchronous quad-pumped (4x) data
• Support for Dynamic FSB Frequency Switching
• Other key features are:
— Support for Intel® Trusted Execution Technology (Intel® TXT) commands and
signaling
— Support for Data Bus Inversion (DBI)
— Support for Intel® Virtualization Technology (Intel® VT) for Directed I/O
(Intel® VT-d) (DMA)
— Support for Message Signaled Interrupt (MSI)
— 36-bit interface to addressing, allowing the CPU to access the entire 64 GB of
the GMCH’s memory address space
— 12-deep, in-order queue to pipeline FSB commands
— AGTL+ bus driver with integrated AGTL termination resistors
1.1.2 System Memory
• Supports DDR2 and DDR3 SDRAM
• Support for DDR2 at 667 MHz and 800 MHz
• Support for DDR3 at 667, 800 and 1066 MHz
• One SO-DIMM connector (or memory module) per channel
• Two Memory Channel Configurations supported
— Dual-channel Symmetric (with Interleaved access)
— Dual-channel Asymmetric (with or without Intel® Flex Memory Technology)
• 8-GB maximum memory support
• 64-bit wide per channel
• 256-Mb, 512-Mb, 1-Gb, and 2-Gb memory technologies supported
• Support for x8 and x16 DDR2 and DDR3 devices
• Support for DDR2/DDR3 On-Die Termination (ODT)
• Supports partial writes to memory using data mask signals (DM)
• No support for Fast Chip Select mode
• No support for ECC
• No support for 1N operation
Link:
http://www.intel.com/Assets/PDF/datasheet/320122.pdf
so nun hab ich alles