S
Speedy_Gonz
Hallo,
habe die undankbare Aufgabe das o.g. Notebook auf XP umzurüsten.
Die Treiber vom Z53SC funzen ohne Probleme, aber:
Beim Brennen, egal mit welchem Programm(Nero 8/ CD BurnerXP) bekomme ich Fehrlemeldungen.
Undefinierter Rekorderfehler. Ich habe ganz unten mal die Logdatei aufgeführt.
Gibt es einen Zusammenhang mit der Einstellung im Bios? Ich kann XP nur starten wenn dort bei den IDE Laufwerken Kompatible anstelle von Enhanced steht.
Vielleicht kann jemand helfen?
MfG
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
Recorder: <MATSHITA DVD-RAM UJ-850S>Version: 1.22 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <MATSHITA DVD-RAM UJ-850S >Version: 1.22 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-850S atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHW2160BH PL atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S E: CdRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096300kB)
Free physical memory: 1564MB (1601576kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.3.2008
ISO Zusammenstellung
15:19:10 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
15:19:10 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:19:10 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)
15:19:10 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media
15:20:02 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2191983 (487:06.33, 4281MB)
15:20:02 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
15:20:02 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD+RW
Disc Manufacturer ID: DAXON, Media Type ID: D42, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
15:20:02 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
15:20:02 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2191984 (2191984) = #2191984/487:6.34
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2191984 blocks [E: MATSHITA DVD-RAM UJ-850S]
--------------------------------------------------------------
15:20:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4489183232, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2191984 | 0 | 0x00
2191984 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
15:20:02 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
15:20:02 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
15:20:02 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
15:20:02 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.
15:20:02 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
15:20:02 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3.324 KB/s)
15:20:02 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:20:03 #18 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 44 41 58 4F 4E - 00 00 00 44 34 32 00 39 ...DAXON...D42.9
23 00 9C 7D 5C 02 28 00 - B0 74 70 02 28 00 96 80 #..}\.(..tp.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
15:20:03 #19 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
15:20:03 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
15:29:58 #21 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 00 00 0E 7F 00 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 0E 7B F0 0A 00 32 00 10 03 01
Buffer x1a3149c0: Len x10000
0xCE E9 FC 3E FB 46 61 FC 92 BB ED 9A 66 4D 90 EA
0xBF DB D7 69 8C 9B 48 BE 78 1D 4F 5F 93 83 5B 6E
0x12 D2 20 F8 E6 45 A0 D2 E3 64 6F 78 7C 7B 0E DA
15:29:58 #22 CDR -1 File Writer.cpp, Line 312
Unspecified Recorder Error
E: MATSHITA DVD-RAM UJ-850S
15:29:58 #23 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 950016
15:29:58 #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3.324 KB/s)
15:29:59 #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:30:04 #26 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
15:30:04 #27 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
habe die undankbare Aufgabe das o.g. Notebook auf XP umzurüsten.
Die Treiber vom Z53SC funzen ohne Probleme, aber:
Beim Brennen, egal mit welchem Programm(Nero 8/ CD BurnerXP) bekomme ich Fehrlemeldungen.
Undefinierter Rekorderfehler. Ich habe ganz unten mal die Logdatei aufgeführt.
Gibt es einen Zusammenhang mit der Einstellung im Bios? Ich kann XP nur starten wenn dort bei den IDE Laufwerken Kompatible anstelle von Enhanced steht.
Vielleicht kann jemand helfen?
MfG
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
Recorder: <MATSHITA DVD-RAM UJ-850S>Version: 1.22 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <MATSHITA DVD-RAM UJ-850S >Version: 1.22 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : MATSHITA DVD-RAM UJ-850S atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MHW2160BH PL atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-850S E: CdRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096300kB)
Free physical memory: 1564MB (1601576kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.3.2008
ISO Zusammenstellung
15:19:10 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
15:19:10 #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:19:10 #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)
15:19:10 #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media
15:20:02 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2191983 (487:06.33, 4281MB)
15:20:02 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
15:20:02 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: MATSHITA DVD-RAM UJ-850S, Media type: DVD+RW
Disc Manufacturer ID: DAXON, Media Type ID: D42, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
15:20:02 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
15:20:02 #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2191984 (2191984) = #2191984/487:6.34
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2191984 blocks [E: MATSHITA DVD-RAM UJ-850S]
--------------------------------------------------------------
15:20:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: MATSHITA DVD-RAM UJ-850S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4489183232, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2191984 | 0 | 0x00
2191984 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
15:20:02 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
15:20:02 #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
15:20:02 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
15:20:02 #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.
15:20:02 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
15:20:02 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3.324 KB/s)
15:20:02 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:20:03 #18 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 44 41 58 4F 4E - 00 00 00 44 34 32 00 39 ...DAXON...D42.9
23 00 9C 7D 5C 02 28 00 - B0 74 70 02 28 00 96 80 #..}\.(..tp.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
15:20:03 #19 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
15:20:03 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
15:29:58 #21 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 00 00 0E 7F 00 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 0E 7B F0 0A 00 32 00 10 03 01
Buffer x1a3149c0: Len x10000
0xCE E9 FC 3E FB 46 61 FC 92 BB ED 9A 66 4D 90 EA
0xBF DB D7 69 8C 9B 48 BE 78 1D 4F 5F 93 83 5B 6E
0x12 D2 20 F8 E6 45 A0 D2 E3 64 6F 78 7C 7B 0E DA
15:29:58 #22 CDR -1 File Writer.cpp, Line 312
Unspecified Recorder Error
E: MATSHITA DVD-RAM UJ-850S
15:29:58 #23 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 950016
15:29:58 #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3.324 KB/s)
15:29:59 #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:30:04 #26 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed
15:30:04 #27 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)