Endlich ein Legales Windows dabei
LOL
changelog Bios:
Intel Calistoga Chipset
;+------------------------------------------------------------------------
;
; Date : 07/25/'07
; ZD1 BIOS Ver. : v1.3706
; Z01 BIOS Ver. : v1.3706
; ZD1 EC Version: 0.040
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1478
; Z01 IGD BIOS : 1478
;
1. Correct the Maximum support memory size value to 2GB when northbridge is
960GL chipset.
base\chipset\smbios.asm
ZD1:
1. Modify to support two audio verb table for fix HDMI item appear on UMA sku.
base\bus\azalia.asm
zd1.tc3\hda_oem.asm
2. Force flag 3G module doesn't exist.
zd1.tc3\make.mak
;+------------------------------------------------------------------------
;
; Date : 07/20/'07
; ZD1 BIOS Ver. : v1.3705
; Z01 BIOS Ver. : v1.3705
; ZD1 EC Version: 0.040
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1478
; Z01 IGD BIOS : 1478
;
1. update oem.twn\base\cpu\cpu.asm from 1.47 to 1.48
2. add microcode to support 6FB cpu(T7700,T7500)
oem.twn\z01.tc3\bcp.asm
oem.twn\zd1.tc3\bcp.asm
OEM.TWN\BASE\CPU\m8006fb.asm
OEM.TWN\BASE\CPU\make.mak
;+------------------------------------------------------------------------
;
; Date : 07/12/'07
; ZD1 BIOS Ver. : v1.3704
; Z01 BIOS Ver. : v1.3704
; ZD1 EC Version: 0.040
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1478
; Z01 IGD BIOS : 1478
;
1. Add AZALIA Audio and Modem Codec present detection workaround.(If any one
missing then force to restart. Maximum retry 5 times)
base\bus\azalia.asm
2. Fix moving left-right in setup menu will very slowly when system doesn't
installed HDD on it.
base\fdisk\make.mak(Remove redefine)
append\hddpswd\kernel\newdtect.asm
;+------------------------------------------------------------------------
;
; Date : 07/06/'07
; ZD1 BIOS Ver. : v1.3703
; Z01 BIOS Ver. : v1.3703
; ZD1 EC Version: 0.040
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1478
; Z01 IGD BIOS : 1478
;
1. Support Amic flash parts to update bios from differrent version
zd1.tc3\flashint.asm
z01.tc3\flashint.asm
2. Add support STM M25P80 flash part
PSI\SILICON\STMicro\M25P80\FLASH.DXE\BIN\STM25P8064.FF
ZD1.TC3\FLASH.DXE\BIN\FlashPlatform64.FF
Z01.TC3\FLASH.DXE\BIN\FlashPlatform64.FF
zd1.tc3\make.mak
z01.tc3\make.mak
zd1.tc3\flashint.asm
z01.tc3\flashint.asm
3. Add back C2 support
OEM.TWN\INTEL.600\PPM\CPU0CST.ASL
;+------------------------------------------------------------------------
;
; Date : 07/02/'07
; ZD1 BIOS Ver. : v1.3702
; Z01 BIOS Ver. : v1.3702
; ZD1 EC Version: 0.040
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1478
; Z01 IGD BIOS : 1478
;
1. Upgrade Kernal codes from r1.31 to r1.32 for fix below:
1. Pass BIOS build under 32 bit Vista.
2. ES register is modified before AFN_ALLOC_NVS.
intel.600\igdoprn\igdoinit.asm
zd1.tc3\make.mak
z01.tc3\make.mak
zd1.tc3\signon.str
z01.tc3\signon.str
zd1.tc3\version.mak
z01.tc3\version.mak
1. Disable the SATA ports not use
base\fdisk\sata.asm
2. Add the selection for configure SATA controller
feats\node\make.mak (add sata.asm)
feats\node\node.str
feats\node\sata.asm
zd1.tc3\make.mak
zd1.tc3\oem_sata.asm
zd1.tc3\template.asm
z01.tc3\make.mak
z01.tc3\oem_sata.asm
z01.tc3\template.asm
3. update vbios version to 1478
4. Enable SD controller ADMA mode for Fix when copy data from SD card to HDD will cause play music by media player un-smooth issue
COMMON\oemcomm.asm
ZD1:
1. support different CPU/VGA combination fan table
zd1.tc3\OEM_DTS.ASM
2. Update EC bios to ZD1_040 for fix below:
1. Added intel UMA thermal table and fan control.
ZD1.tc3\ec\zD1_040.bin make.mak
;+------------------------------------------------------------------------
;
; Date : 06/23/'07
; ZD1 BIOS Ver. : v1.3701
; Z01 BIOS Ver. : v1.3701
; ZD1 EC Version: 0.039
; Z01 EC Version: 0.040
; ZD1 IGD BIOS : 1436
; Z01 IGD BIOS : 1436
;
1. Upgrade Kernal codes from r1.29 to r1.31 for fix below:
1. Implement ICH8 BSU1.6
2. Incorporated SantaRosa PPM reference code V1.51.
3. Additional PCIE Native Mode support.
4. Added Penryn MSR save/restore tables.
5. Fix hung-up in POST when PCI-Express which has only one capability device
is found..
smp\intel\crestlne\common\oem.inc
smp\intel\crestlne\common.tc3\intlapin.asm intlapmr.asm pmcache.asm
postb.asm smicache.asm pcieutil.asm usbinit.asm make.mak
smp\intel\crestlne\crb.tc3\bcp.asm make.mak signon.str xception.lst
version.mak
smp\intel\crestlne\intel.600\acpi\asl\host_bus.asl
smp\intel\crestlne\intel.600\ppm\cpu0cst.asl ppminit.asm ppmmrm.asm
ppmprn.asm
smp\intel\crestlne\intel600.tc3\acpi\asl\globlnvs.asl
smp\intel\crestlne\setup\cpu\cpu.str
smp\intel\crestlne\setup\ich\lancfg.asm
oem.twn\base\cpu\intlapmr.asm
oem.twn\base\cpufeats.003\intlapin.asm
oem.twn\common\pcieutil.asm oem.inc
oem.twn\base\usb\usbinit.asm
oem.twn\append\asl\host_bus.asi globlnvs.asi
oem.twn\intel.600\ppm\cpu0cst.asl ppminit.asm ppmmrm.asm ppmprn.asm
zd1.tc3\cpu.str
z01.tc3\cpu.str
2. Fix HDD master password can not be unlocked on WesternDigital HDD.
append\hddpswd\hddpwd.src\hddpwsvc.asm
3. Fix Brighness control can not show up in Mobility Center and test fail with
int15 test program on 960GL sku.
base\chipset\grfxinit.asm
base\chipset\make.mak
4. Update codes.
base\cpu\vrcomply.asm
5. Update EC bios to ZD1_039, Z01_040 for fix below:
1. Fixed ACIN pin not stable in power on state.
z01.tc3\ec\z01_040.bin make.mak
zD1.tc3\ec\zD1_039.bin make.mak
6. Add support CM550 cpu dmi family type detection.
cpu\intel\p8\cpup8.inc
z01.tc3\bcp.asm
zd1.tc3\bcp.asm
;+------------------------------------------------------------------------
;
; Date : 06/15/'07
; ZD1 BIOS Ver. : v1.3602
; Z01 BIOS Ver. : v1.3603
; ZD1 EC Version: 0.038
; Z01 EC Version: 0.039
; ZD1 IGD BIOS : 1436
; Z01 IGD BIOS : 1436
;
1. Set Default NativePcie to disabled.
zd1.tc3\bcp.asm
z01.tc3\bcp.asm
2. Add back nVidia vbios miss first digit.
append\vga\nvd_vga.asm
ZD1:
1. Correct bios version string.
zd1.tc3\oem_def.inc
;+------------------------------------------------------------------------
;
; Date : 06/15/'07
; ZD1 BIOS Ver. : v1.3601
; Z01 BIOS Ver. : v1.3602
; ZD1 EC Version: 0.038
; Z01 EC Version: 0.039
; ZD1 IGD BIOS : 1436
; Z01 IGD BIOS : 1436
;
1. Upgrade kernal codes from 1.21 to 1.29
bootblok\security\tcg\common.002\bbtcg.asm bbtcg.inc
bootblok\security\tpm\generic\callmadr.asm make.mak tpmconfig.asm
tpmmadrv.asm
bootblok\smp\intel\crestlne\crb.tc3\fcp.asm hooks.asm
bus\bridg\intel\ich8\ich8_did.inc impcode.asm spides2p.asm
spidesc1.asm spidesc2.asm spidesc4.asm spidesc5.asm
spidesc6.asm spidesc8.asm spi.inc spiflash.asm
cache\intel\p8\pmcache.asm smicache.asm
chipset\intel\crestline\memory\bb_init.bin carinit.asm
cpumem.inc meminit.bin pm32.asm
chipset\intel\crestline\cs.inc efimtrr.asm grfxinit.asm
make.mak
cpu\intel\p8\dothan.001\cpu.str
cpu\intel\p8\merom\ucode\intelmu.txt m2006f2.asm m2006f6.asm
m8006fa.asm m8006fd.asm
cpu\intel\p8\meron\cpu.str
cpu\intel\p8\meron_l\cpu.str
cpu\intel\p8\nodes.600\cmpcfg.asm echo_tpr.asm ied_cfg.asm ratiocpu.asm
stp_gnt.asm vt_cfg.asm
cpu\intel\p8\north_wd\cpu.str
cpu\intel\p8\prescott\cpu.str
cpu\intel\p8\willamet\cpu.str
cpu\intel\p8\ap_brvid.asm ap_brvid.bin cpu.asm cpu.str cpuspeed.asm
cputimer.asm e_apinit.asm e_brvid.asm ied_imp.asm spdetect.asm
vrcomply.asm
fdisk\intel\ich8\sata.asm udma.asm
features\security\tcg\common.002\acpitcg.asm postinit.asm pp.asm
tcglog.asm tcgsmi.asm tcgutil.asm tcpa.inc
features\security\tcg\tcgnodes\tcgcmos.asm tpmmenu.asm
features\security\tcg\tpm\generic\tpm.asl tpmmpdrv.asm
features\ucr\common.600\intdata.asm
gui\src\intrface.001\ifcpost.asm
include.600\newflash.inc
miser\chipset.001\intel\ich8\smi\cssmi.asm
miser\common4.600\getseg.asm
pnp\ptl\common.003\pci\rts\dsrint.asm pcidsr.asm
script.600\core600.dcn filerev.dcn filerev.dfl
smp\intel\crestlne\common\dmioem.asm oem.inc oprom.asm
smp\intel\crestlne\common.tc3\imp_bus.asm make.mak optimem5.asm
pbreset.asm sbacpis3.asm usbinit.asm
smp\intel\crestlne\flash.dxe\bin\flashplatform64.ff
smp\intel\crestlne\setup\acpi\acpi.str make.mak natpcie.asm
smp\intel\crestlne\intel600.tc3\acpi\asl\globlnvs.asl platform.asl
smp\intel\crestlne\crb.tc3\bcp.asm psi.lst rom.scr signon.str
template.asm version.mak xception.lst make.mak
smp\intel\crestlne\intel.600\apmlvl2.asm gmchpm.asm ich8cgo1.asm
initlstk.asm intcregs.inc ksccode.asm make.mak
smp\intel\crestlne\intel.600\acpi\acpinvs.asm acpitbl.asm facp.tbl
facp3.tbl
smp\intel\crestlne\intel.600\acpi\asl\ec.asl host_bus.asl ich8.asl
pcieprt.asl
smp\intel\crestlne\intel.600\amt\amt.asm amt.inc amtboot.asm fatfile.asm
ider.asm usbklp.asm usbklp.inc
smp\intel\crestlne\intel.600\amt\override\asf.asm asfboot.asm
pnpboot.asm
smp\intel\crestlne\intel.600\igdoprn\igdoinit.inc igdomobf.asl
igdoprn.asl
smp\intel\crestlne\intel.600\pcie\pciecid2.asm pcieoem.asm
smp\intel\crestlne\intel.600\ppm\ppm.inc ppmmrm.asm ppmprn.asm
append\asl\host_bus.asi ich8.asi igdomobf.asi igdoprn.asi pcieprt.asi
ptswak.asi
base\bus\imp_bus.asm pbreset.asm spiflash.asm
base\cache\pmcache.asm smicache.asm
base\fdisk\sata.asm
base\miser\sbacpis3.asm
base\pnp\optimem5.asm make.mak
base\usb\usbinit.asm
common\dmioem.asm oem.inc
intel.600\acpi\acpinvs.asm acpitbl.asm
intel.600\amt\override\asf.asm asfboot.asm pnpboot.asm
intel.600\amt\amt.asm amt.inc amtboot.asm fatfile.asm ider.asm
usbklp.asm usbklp.inc
intel.600\igdoprn\igdoinit.inc
intel.600\pcie\pciecid2.asm pcieoem.asm
intel.600\pmm\pmm.inc ppmmrm.asm ppmprn.asm
intel.600\apmlvl2.asm gmchpm.asm initlstk.asm intcregs.inc make.mak
ksccode.asm
feats\node\natpcie.asm make.mak acpi.str
z01.tc3\bcp.asm make.mak signon.str template.asm version.mak facp.tbl
facp3.tbl string.scr
zd1.tc3\bcp.asm make.mak signon.str template.asm version.mak facp.tbl
facp3.tbl string.scr
OEM.TWN\BASE\POST\postb.asm
SMP\INTEL\CRESTLNE\COMMON.TC3\postb.asm
OEM.TWN\intel.600\INITLSTK.ASM
SMP\INTEL\CRESTLNE\INTEL.600\INITLSTK.ASM
2. Add support x64 winflash of AMIC A25L80P.
zd1.tc3\flash.dxe\platform.cpp
z01.tc3\flash.dxe\platform.cpp
3. Change STMicro spi flash command to 0x9F for detect type confuse with AMIC.
(Needs change PHLASH16.EXE version to v1.6.7.2)
base\pnpnvs\st25p80.asm
base\w8769\wspiflsh.asm
base\make.mak
ZD1:
1. Add TV module type detection int15h,ax=9610,bx=00f0h function call for
manufacturing use.(return bl=1 AVerMedia, bl=2 YUANRD)
base\usb\enumrate.asm
feats\preload\handler.asm
feats\preload\pretable.asm
zd1.tc3\oem_tv.asm
;+------------------------------------------------------------------------
;
; Date : 06/14/'07
; ZD1 BIOS Ver. : v1.3511
; Z01 BIOS Ver. : v1.3509
; ZD1 EC Version: 0.038
; Z01 EC Version: 0.039
; ZD1 IGD BIOS : 1436
; Z01 IGD BIOS : 1436
;
1. Remove display Signon string when quiet boot set to "disabled" or
in diagnostic screen.
zd1.tc3\signon.str
z01.tc3\signon.str
2. Fix nVidia vga bios version number display in setup had lost first digit.
append\vga\nvd_vga.asm
ZD1:
1. Add support UMA vga.
zd1.tc3\bcp.asm
zd1.tc3\make.mak
zd1.tc3\vga\intel\1436\*.*
zd1.tc3\oem_aspm.asm
zd1.tc3\rom.scr
zd1.tc3\template.asm
2. Add support x64 winflash of WinBond W25X80, EON EN25F80, MXIC MX25L800.
zd1.tc3\make.mak
;+------------------------------------------------------------------------
;
; Date : 06/08/'07
; ZD1 BIOS Ver. : v1.3510
; Z01 BIOS Ver. : v1.3508
; ZD1 EC Version: 0.038
; Z01 EC Version: 0.039
; Z01 IGD BIOS : 1436
;
1. Clear the WMI set_devices BUFF report value.
append\asl\wmi_oem.asi
2. Change Qevent Q94 and Q95 notify command from 80h to 82h for e-present.
append\asl\wmi_q.asi
ZD1:
1. Change EC bios to 0.38 for fix below:
1. Remove CIR wakeup from S4/S5 in DC mode.
2. Add support flash EON EN25F80 and AMIC A25L80P.
zd1.tc3\bcp.asm
Z01:
1. Change EC bios to 0.39 for fix below:
1. Remove Arcade button wakeup from sleep mode. #
2. Remove CIR wakeup from S4/S5 in DC mode.
;+------------------------------------------------------------------------
;
; Date : 06/01/'07
; ZD1 BIOS Ver. : v1.3509
; Z01 BIOS Ver. : v1.3507
; ZD1 EC Version: 0.037
; Z01 EC Version: 0.037
; Z01 IGD BIOS : 1436
;
1. Add new cpu microcode CPUID=661h for support cpu M540.
base\cpu\m810661.asm
base\cpu\make.mak
z01.tc3\bcp.asm
zd1.tc3\bcp.asm
2. Add back int15 AX=9610h, BX=0015h reportS4ResumeStatus to fix D2D disable
setting doesn't work in bios setup.
feats\preload\handler.asm
feats\preload\pretable.asm
;+------------------------------------------------------------------------
;
; Date : 05/22/'07
; ZD1 BIOS Ver. : v0.3508
; Z01 BIOS Ver. : v0.3506
; ZD1 EC Version: 0.037
; Z01 EC Version: 0.037
; Z01 IGD BIOS : 1436
;
ZD1:
1. Modify HDA verb table to fix S4 pop noise under XPe.
ZD1.tc3\hda_oem.asm
2. Change access Brightness level value from SMI to via ECRAM offset 0x51
for avoid slip brightness bar cause popo sound when play media player at
the same time.
append\asl\ec.asi
append\asl\vga_lcd.asi
append\asl\wmi_q.asi
zd1.tc3\qci_inc.asi (Add BRIGHTNESS_ECRAM flag)
;+------------------------------------------------------------------------
;
; Date : 05/18/'07
; ZD1 BIOS Ver. : v0.3507
; Z01 BIOS Ver. : v0.3506
; ZD1 EC Version: 0.037
; Z01 EC Version: 0.037
; Z01 IGD BIOS : 1436
;
Z01:
1. Change access Brightness level value from SMI to via ECRAM offset 0x51
for avoid slip brightness bar cause popo sound when play media player at
the same time.
append\asl\ec.asi
append\asl\vga_lcd.asi
append\asl\wmi_q.asi
z01.tc3\qci_inc.asi (Add BRIGHTNESS_ECRAM flag)
;+------------------------------------------------------------------------
;
; Date : 05/17/'07
; ZD1 BIOS Ver. : v0.3507
; Z01 BIOS Ver. : v0.3505
; ZD1 EC Version: 0.037
; Z01 EC Version: 0.037
; Z01 IGD BIOS : 1436
;
1. Add clear ESCD EC protection flag cmd 0x94 after exit ESCD for try to improve casue
"Data written to flash does not match Bios rom image" when update bios.
append\ec\ec_escd.asm
2. Change EC bios to 0.37 for fix below:
1. Add brightness control by ECRAM.
2. Add support AMIC spi flash function.
3. Remove volume up/down control by hotkey.
4. Modify D/C- control method by power team request.
5. Add clear ESCD flag command 0x94.
Z01:
1. Add Clear GIPMC1 and FSBPMC1 for nVidia L0s/L1 enabled workaround.
z01.tc3\oem_aspm.asm
2. Modify for support new ClockGen Realtek RTM875T-606.
z01.tc3\oemclock.asm
3. Add support more spi flash component EON EN25F80 and AMIC A25L80P.
base\pnpnvs\en25F80.asm
base\pnpnvs\make.mak
z01.tc3\bcp.asm
;+------------------------------------------------------------------------
;
; Date : 05/16/'07
; ZD1 BIOS Ver. : v0.3506
; Z01 BIOS Ver. : v0.3504
; ZD1 EC Version: 0.035
; Z01 EC Version: 0.034
; Z01 IGD BIOS : 1436
;
1. Force int15 preload function AX=9610h, BX=0010h vga panel resolution to
1280x800.
feats\preload\handler.asm
2. Add back some skip post tasks during arcade booting for UUID didn't loaded
correctly.
feats\instanon\instanon.asm
;+------------------------------------------------------------------------
;
; Date : 05/12/'07
; ZD1 BIOS Ver. : v0.3505
; Z01 BIOS Ver. : v0.3504
; ZD1 EC Version: 0.035
; Z01 EC Version: 0.034
; Z01 IGD BIOS : 1436
;
1. Remove Instant On "Pretty Boot" function.
feats\instanon\instanon.asm
;+------------------------------------------------------------------------
;
; Date : 05/09/'07
; ZD1 BIOS Ver. : v0.3504
; Z01 BIOS Ver. : v0.3504
; ZD1 EC Version: 0.035
; Z01 EC Version: 0.034
; Z01 IGD BIOS : 1436
;
1. Fix can not enter S3 when plugin one usb1.1 and one usb2.0 devices at the
same time.
append\asl\usb.asi
2. Add change thermal temperature _CRT to 97'c, _PSV to 80'c when TJ85 cpu
installed.
append\asl\thermal.asi
append\asl\ec.asi
3. Add report motherboard i/o resource 68h to 6Fh.
append\asl\lpc_dev.asi
4. Change nVidia Get_Panel_Resolution function parameter for new Vga bios
changed and remove force panel resolution in PRELOAD int15 function call.
append\vga\nvd_vga.asm
feats\preload\handler.asm
ZD1:
1. Change EC bios to v0.35 to fix below:
1. Update fan table.
;+------------------------------------------------------------------------
;
; Date : 05/04/'07
; ZD1 BIOS Ver. : v0.3503
; Z01 BIOS Ver. : v0.3503
; ZD1 EC Version: 0.034
; Z01 EC Version: 0.034
; Z01 IGD BIOS : 1436
;
1. Fix int15 preload function AX=9610h, BX=0236h vga verdor doesn't support.
feats\preload\pretable.asm
2. Fix int15 preload function AX=9610h, BX=0010h vga panel resolution incorrect.
feats\preload\handler.asm
3. Change EC bios to v0.34 to fix below:
1. Fixed Arcade Key wakeup from S3/S4 to vista or XPE issue.
zd1.tc3\ec\zd1_034.bin
z01.tc3\ec\z01_034.bin
Z01:
3. Change EC bios to v0.34 to fix below:
1. Fixed Arcade Key wakeup from S3/S4 to vista or XPE issue.
2. Add Nevida VGA card thermal address and command.
z01.tc3\ec\z01_034.bin
;+------------------------------------------------------------------------
;
; Date : 04/30/'07
; ZD1 BIOS Ver. : v0.3502
; Z01 BIOS Ver. : v0.3502
; ZD1 EC Version: 0.032
; Z01 EC Version: 0.032
; Z01 IGD BIOS : 1436
;
1. Remove EHCI _PRW for cause can not enter S3 when Plug in USB mouse.
append\asl\usb.asi
2. Correct int15 serial port 2 report from "disable" to "no exist".
feats\nbm\hand9610.asm
3. Add int15 parallel port 2 report.
feats\nbm\hand9610.asm
4. Fix some machines run "Acerdef.exe" to load cmos default will hang up.
(Move "oemNvaSetDefaultsFar" from "oemPostSegmentFar" to "BiosSegment")
intel.600\oemhooks.asm
5. Add new Winflash64 codes for support product name detection.
zd1.tc3\flash.dxe\bin\FlashPlatform64.FF
z01.tc3\flash.dxe\bin\FlashPlatform64.FF
PSI\SILICON\Winbond\25x80\FLASH.DXE\BIN\W25x8064.FF \
PSI\SILICON\Winbond\8769\SPI.DXE\BIN\SpiController64.FF \
PSI\SILICON\INTEL\CHIPSET\INTELICH\ICH8\FLASH.DXE\LPC.dxe\BIN\FlashChipset64.FF \
WINFLASH64(v.1.0.2.2)
6. Change EC bios to v0.32 to fix below:
1. Fixed Arcade Key can't wakeup from S5 issue.
zd1.tc3\ec\zd1_032.bin
z01.tc3\ec\z01_032.bin
Z01.
1. Correct Product code name to "Nestos".
zd1.tc3\oemfeats.asm
;+------------------------------------------------------------------------
;
; Date : 04/18/'07
; ZD1 BIOS Ver. : v0.3501
; Z01 BIOS Ver. : v0.3501
; ZD1 EC Version: 0.031
; Z01 EC Version: 0.031
; Z01 IGD BIOS : 1436
;
1. Upgrade kernal codes from 1.19 to 1.21.
cache\intel\p8\cachedes.asm
chipset\intel\crestlne\memory\*.*
chipset\intel\crestlne\nodes\igdpscal.asm video.str hecimsg,asm
impshare.asm
cpu\intel\p8\merom\ucode\m8006fd.asm
cpu\intel\p8\apcc4.asm cpu.asm cpumc.asm cpup8.inc cputimer.asm
gpf_feat.asm iedsmm32.asm make.mak p8_thrd.asm smminfo.asm
cpu\intel\multi_cr\mc_code.asm
rom.icr
smp\intel\crestlne\common\apdpth.asm oem.inc
smp\intel\crestlne\common.tc3\imp_bus.asm postb.asm sata.asm
satainit.asm usbinit.asm
smp\intel\crestlne\crb.tc3\bcp.asm make.mak template.asm
smp\intel\crestlne\intel.600\acpi\acpicode.asm acpicode.inc acpinvs.asm
acpitbl.asm
smp\intel\crestlne\intel.600\igdoprn\igdoinit.asm igdoinit.inc
igdomobf.asl igdopen.asl
smp\intel\crestlne\intel.600\pcie\pciecid1.asm pciecid2.asm
smp\intel\crestlne\intel.600\ppm\ppmprn.asm *.*
smp\intel\crestlne\setup\setup.str
smp\intel\crestlne\intel.600\gmchpm.asm i15hook.asm i15hook.inc
oemhooks.asm serv.asm smionslp.asm smitrap3.asm
smp\intel\crestlne\intel.600\intel600.tc3\acpi\asl\platform.asl
smp\intel\crestlne\setup\cpu\ppmcfg.asm make.mak prnmenu.asm
base\bus\imp_bus.asm
base\cpu\cpu.asm
base\fdisk\sata.asm
base\fdisk\satainit.asm
base\miser\apdpth.asm
intel.600\acpi\acpicode.asm acpicode.inc acpinvs.asm acpitbl.asm
intel.600\amt\*.*
intel.600\igdoprn\igdoinit.asm igdoinit.inc igdomobf.asl igdoprn.asl
intel.600\pcie\pciecid1.asm pciecid2.asm
intel.600\ppm\*.*
intel.600\gmchpm.asm i15hooks.asm i15hooks.inc oemhooks.asm serv.asm
smionslp.asm smitrap3.asm
z01.tc3\bcp.asm
zd1.tc3\bcp.asm
2. Fix Crisis flash cuase by Fn+ESC will very slow issue.
(change detect hotkey from HookForceCheckJ to HookCheckSumBiosJ)
base\bootblok\crisishk.asm
base\bootblok\hooks.asm
3. Add back check every pcie port in _L01 and _L09 event.
append\gpe.asi
4. Change EC bios to V0.32 to fix below issues:
1. Move enable CEIR module from EC firmware to PE test program.
2. Update scancode to meet acer specification.
3. Fixed ESCD can't write fail issue.
4. Fixed Arcade Key can't wakeup from S5 issue.
Z01:
1. Correct the INTEL UMA string name to "Santa Rosa".
append\vga\itl_vga.asm
2. Change UMA vga bios setting
for External CRT resolution doesn't correct(Clear OEM mode#1 configuration)
for panel T2 timming from 60ms to 40ms.(Addr 0021608h=019007D0h)
;+------------------------------------------------------------------------
;
; Date : 04/04/'07
; ZD1 BIOS Ver. : v0.2412
; Z01 BIOS Ver. : v0.2412
; ZD1 EC Version: 0.030A
; Z01 EC Version: 0.030A
; Z01 IGD BIOS : 1436
;
1. Change EC bios to 0.30A for Write Protect ESCD start at Address FFF80000.
(add mask address FFF00000h).
;+------------------------------------------------------------------------
;
; Date : 04/04/'07
; ZD1 BIOS Ver. : v0.2411
; Z01 BIOS Ver. : v0.2410
; ZD1 EC Version: 0.029
; Z01 EC Version: 0.029
; Z01 IGD BIOS : 1436
;
1.Add 3G card support in WMI.
append\asl\ec.asi
append\asl\wmi_q.asi
append\asl\wmi_oem.asi
feats\wmi\wmi.inc
feats\wmi\wmihand.asm
feats\wmi\wmiimpcd.asm
zd1.tc3\3gdetect.asm
zd1.tc3\make.mak
2.Modify CIR ASL code for support Windows XP.
append\wb_cir.asi
3.Modify Instant On fuction and support "Pretty Boot".
base\acpi\acpisbf.asm
base\post\bioreset.asm
feats\instanon\instanon.asm
feats\oemfeats.inc
zd1.tc3\bcp.asm (Add FRAME_BUFFER in INSTALL_GUI)
z01.tc3\bcp.asm (Add FRAME_BUFFER in INSTALL_GUI)
4.Fix "Maximum amount of memory" in esetting Memory infomation report wrong
value.
base\chipset\smbios.asm
base\chipset\make.mak
5.Fix SMI doesn't work after resume from S3 issue.
base\miser\sbacpis3.asm
6.remove unuse code to speed resume time.
base\miser\bioreset.asm (remove sioreset)
base\bootblok\fcp.asm (add ACPIS3SKIP)
7.Add turn off AHCI mode before sleep HDD drive during reboot process.
common\oemcomm.asm
8.Correct wrong code cause NBM disable user password hangup issue.
feats\nbm\hand9610.asm
9.Fix LAN EEPROM write fail and DOS test fail after bios 2408.
zd1.tc3\oemcode.asm
z01.tc3\oemcode.asm
10.Update Codes.
append\asl\gpe.asi
append\asl\globlnvs.asi
11.Add new ESCD EC Write protect command 093h to protect exclude
FFF80000-FFF8FFFF.
append\ec\ec_escd.asm
12.Upgrade CPU microcodes.
base\cpu\m2006F2.asm
base\cpu\m2006F6.asm
base\cpu\m8006Fa.asm
base\cpu\m8006Fd.asm
base\cpu\make.mak
zd1.tc3\bcp.asm
z01.tc3\bcp.asm
Z01:
1. Fix LAN MAC Address read fail when use STUUID20.exe
z01.tc3\oemfeats.asm
2.Change EC bios v0.29 to fix below:
1. Add Write ESCD flash software protection function.
ZD1:
1.Change EC bios v0.29 to fix below:
1. Add Write ESCD flash software protection function.
2. Modify TV button scancode to meeting acer spec.
3. Add 3G device control method.
4. Modify VGA power good power sequence.
;+------------------------------------------------------------------------
;
; Date : 03/27/'07
; ZD1 BIOS Ver. : v0.2410
; Z01 BIOS Ver. : v0.2409
; ZD1 EC Version: 0.028
; Z01 EC Version: 0.028
; Z01 IGD BIOS : 1436
;
1. Fix 1394 NewCard insert on system S3 mode, device will not been detected
after S3 wake up issue.
append\asl\ptswak.asi
2. Correct security user password wrong code case int15 fail issue.
feats\nbm\hand9610.asm
3. Fix VGA switch display mode lose LCD device issue.
append\asl\lid.asi
4. Change EC bios to 0.28 for fix below:
1. Fixed S4/S5 LAN power lost issue.
2. Add DTS fail protection solution.
3. Fixed anykey can't wakeup S3 issue.
5. Remove unuse codes.
append\vga_lcd.asi
bootblok\make.mak
base\core\make.mak
Z01:
1. Fix Brightness OS control disappear on ATI sku.
append\asl\lid.asi
;+------------------------------------------------------------------------
;
; Date : 03/22/'07
; ZD1 BIOS Ver. : v0.2409
; Z01 BIOS Ver. : v0.2408
; ZD1 EC Version: 0.027
; Z01 EC Version: 0.027
; Z01 IGD BIOS : 1436
;
1. Add Adjust PCIE bridge and device irq for LAN and Wireless LAN DOS test
program.
common\oemcomm.asm
zd1.tc3\oemcode.asm
z01.tc3\oemcode.asm
zd1.tc3\pcioem.asm
z01.tc3\pcioem.asm
2. Add Enable HPET timer for DTM test fail.
zd1.tc3\bcp.asm
z01.tc3\bcp.asm
3. Fix DTM PCI Compliance Test except "Bit4" issue.
common\oemcomm.asm
4. Fix INT15 disable user password function hangup issue.
feats\nbm\hand9610.asm
5. Update WMI codes for 0.9 spec.
append\asl\ec.asi
append\asl\wmi.asi
append\asl\wmi_inc.asi
append\asl\wmi_oem.asi
append\asl\wmi_q.asi
append\asl\wmibuff.asi
6. Add NBM & PRELOAD function AX=9610h BL=03Dh.
feats\nbm\hand9610.asm
feats\preload\handler.asm
feats\preload\pretable.asm
feats\preload\make.mak
7. Remove unuse codes.
intel.600\apmlvl2.asm
intel.600\igdmisc.asm
8. Fix Fn+ESC hotkey crisis doesn't work issue.
base\bootblok\crisishk.asm
9. Update EC bios to 0.27 to fix below:
1. Add wireless / bluetooth hotkey Q-event.
2. Add backlight state change Q-event
3. Fixed enter key scancode issue.
4. Fixed Quickbutton wake from suspend issue.
;+------------------------------------------------------------------------
;
; Date : 03/15/'07
; ZD1 BIOS Ver. : v0.2408
; Z01 BIOS Ver. : v0.2407
; ZD1 EC Version: 0.026
; Z01 EC Version: 0.026
; Z01 IGD BIOS : 1436
;
1. Correct Battery Information reference wrong "Battery Design Voltage".
append\asl\battery.asi
append\asl\ec.asi
append\asl\wmi_oem.asi
2. Update code for LID switch.
append\asl\ich8.asi
append\asl\lid.asi
3. Update code for WMI
append\asl\wmi_oem.asi
append\asl\wmi_q.asi
4. Fix brightness issue by ePM
append\asl\vga_lcd.asi
5. Update code for W8769
base\w8769\wspiflsh.asm
common\hooks.asm (mask hookCpuInitialize2J)
common\oemcomm.asm (add oemW8769DecodeInit)
6. Fix set password incorrect via eSetting
feats\nbm\hand9610.asm
7. Support Winflash64
psi\*.*
oem.twn\z01.tc3\flash.dxe\*.*
oem.twn\zd1.tc3\flash.dxe\*.*
oem.twn\z01.tc3\make.mak (modify EXTERN_FLASH64_DRIVERS=)
oem.twn\zd1.tc3\make.mak (modify EXTERN_FLASH64_DRIVERS=)
Z01:
1. Update UMA VRAM item
base\chipset\memsto.asm
base\chipset\memtot.asm
common\commom.str
z01.tc3\bcp.asm (override cmosIGDTotalMemorySize)
z01.tc3\template.asm (add IGDStolenMemorySize & mask IGDTotalMemorySize)
ZD1:
1. Update peg vga code for nVidia Driver 95.
append\asl\vga.asi
;+------------------------------------------------------------------------
;
; Date : 03/09/'07
; ZD1 BIOS Ver. : v0.2407
; Z01 BIOS Ver. : v0.2406
; ZD1 EC Version: 0.026
; Z01 EC Version: 0.026
; Z01 IGD BIOS : 1436
;
1. Enable USB wake from S3 (depand on Driver).
append\asl\usb.asi
2. Fast normal Post boot time.
base\acpi\acpisbf.asm
base\acpi\make.mak
base\pnp\maxbus.asm (modify pciMaxBus32 from 0ffh to 0fh)
base\pnp\make.mak
common\hooks.asm (Add HookSysShadowConfigJ)
intel.600\initestk.asm (Add postSSBMppmMaxPState)
zd1.tc3\bcp.asm (Add CACHE_PCI_OPROMS in INSTALL_PTLPNP, add OEM_HDD_MAP)
z01.tc3\bcp.asm (Add CACHE_PCI_OPROMS in INSTALL_PTLPNP, add OEM_HDD_MAP)
3. ****** more post boot time for InstantOn feature.
base\post\bioreset.asm (Add HookJ InstantOnCheck)
feat\oemfeats.inc
feat\instanon\make.mak
feat\instanOn\instanon.asm
(hookRefreshTestJ, hookI8742TestJ, hookSetupKeyclickJ, hookKeyboardTestJ
hookDisplayCacheSizeJ, hookDisplayShadowsJ, hookRomRamTestJ
hookCDTestJ, hookDMIConfigJ, hookBootMenuJ, hookCheckSmartJ)
4. Enable Slow_C4_Exit.
common\oemcomm.asm
ZD1.
1. Add nVidia VGA MXM structure and call-back function 5f80h to support new
vga bios.
append\vga\nvd_vga.asm
2. Correct the NEWCARD_EN GPIO pin to GPI.
zd1.tc3\gpioinit.asm
3. Change EC bios to V0.26 for fix below
1. Fixed PE test program PCU.EXE hang-up issue.
2. Add blinking battery LED when system booting in battery low.
3. Fixed CIR enter sleep state can't wakeup issue.
4. change LAN low power pin control by power channel 2 command.
Z01.
1. Enable InstantOn Feature.
z01.tc3\bcp.asm
2. Change EC bios to V0.26 for fix below
1. Fixed PE test program PCU.EXE hang-up issue.
2. Disable power button and arcade button bring-up function when
Lid close.
3. Add blinking battery LED when system booting in battery low.
4. Fixed CIR enter sleep state can't wakeup issue.
5. change LAN low power pin control by power channel 2 command.
6. Fixed Hotkey Crisis function.
7. Fixed Power LED of suspend.
8. Add LAN cable sensor function.
9. Fixed acer arcade button booting function. #
;+------------------------------------------------------------------------
;
; Date : 02/16/'07
; ZD1 BIOS Ver. : v0.2406
; Z01 BIOS Ver. : v0.2405
; ZD1 EC Version: 0.023A
; Z01 EC Version: 0.022
; Z01 IGD BIOS : 1410
;
1. Update code for WMI
append\asl\ec.asi (add LANC for LAN Cable Status)
append\asl\main.asl (add wmi_inc.asi)
append\asl\qevent.asi (remove Q8A)
append\asl\vga_lcd.asi
append\asl\wmi.asi (modify WMBA to support sub-function 8-12)
append\asl\wmi_inc.asi
append\asl\wmi_intr.asi (mask wmi_inc.asi)
append\asl\wmi_oem.asi (modify getDeviceStatus, setDeviceStatus &
oemNotify)
append\asl\wmi_q.asi (add _Q8A & _Q8B for LAN Cable in/out)
append\asl\wmibuff.asi
feats\wmi\wmi.inc
feats\wmi\wmihand.asm
z01.tc3\oemfeats.asm (add oemGetPcmciaPfa)
zd1.tc3\oemfeats.asm (add oemGetPcmciaPfa)
2. Make delay for hard disk ready before issuing command 8C
common\oemcomm.asm (modify oemSleepSataDevJ)
3. Update AZALIA Audio Codec Verb-Table for position change to front side.
zd1.tc3\hda_oem.asm
z01.tc3\hda_oem.asm
for Z01
1. Update code
z01.tc3\qci_inc.asi (mask INTEL_DPST)
For ZD1
1. Support 3G status update
zd1.tc3\3gdetect.asm
2. Change Instant_On function for feature installation.
zd1.tc3\make,mak
zd1.tc3\instanon.asm (move to feat\instanon)
zd1.tc3\bcp.asm
feat\instanon\instanon.asm
feat\instanon\make.mak
feat\make.mak
feat\oemfeats.inc (add INSTANT_ON)
3. Remove TV and WLAN L0s/L1 Enabled, Because it will cause hang during
OS booting.
zd1.tc3\oem_aspm.asm
;+------------------------------------------------------------------------
;
; Date : 02/14/'07
; ZD1 BIOS Ver. : v0.2405
; Z01 BIOS Ver. : v0.2404
; ZD1 EC Version: 0.023A
; Z01 EC Version: 0.022
; Z01 IGD BIOS : 1410
;
1. Fix when wake system S3 from Lan, then system can not sleep issue.
append\asl\gpe.asi
2. Add longer delay(from 2800h to 4000h) in oemSleepSataDevJ for reboot.
common\oemcomm.asm
for ZD1:
1. Clear GIPMC1 and FSBPMC1 for nVidia L0s/L1 enabled.
zd1.tc3\oem_aspm.asm
zd1.tc3\make.mak
2. Enable TV and WLAN L0s/L1.
zd1.tc3\oem_aspm.asm
3. Turn off Clockgen PCI4_OE for saving power.
zd1.tc3\oemclock.asm
for Z01:
1. Config UMA Vga bios to turn off DPST function.
;+------------------------------------------------------------------------
;
; Date : 02/12/'07
; ZD1 BIOS Ver. : v0.2404
; Z01 BIOS Ver. : v0.2403
; ZD1 EC Version: 0.023A
; Z01 EC Version: 0.022
; Z01 IGD BIOS : 1410
;
1. Support Intel DPST to adjust brightness
append\asl\intelgfx.asi (add vga_lcd.asi to _ADR is 0x410)
append\asl\vga_lcd.asi
append\asl\wmi_q.asi
intel.600\apci\acpiinit.asm
intel.600\apci\acpissdt.asm (mask the code related to ddr1brt)
intel.600\acpi\make.mak (mask dd01brt.asl)
intel.600\igdoprn\idgoinit.asm (init CLID status)
intel.600\igdoprn\igdoinit.inc (update OPREGION_VER to 0101h)
z01.tc3\qci_inc.asi (unmask BRIGHTNESS_VISTA & add INTEL_DPST)
2. Don't erase ESCD when updating BIOS
z01.tc3\flsahint.asm (set ERASE_ESCD to 0)
zd1.tc3\flsahint.asm (set ERASE_ESCD to 0)
for ZD1
1. Fix B2 board(ALC888S) Beep no sound under DOS issue.
zd1.tc3\hda_oem.asm
2. Add Acer Instant_On Specification.
zd1.tc3\instanon.asm
zd1.tc3\make.mak
3. Change EC to 0.23A to fix below and support Instant_On.
1. Fixed intel DTS load fan table issue. #
for Z01
1. Change EC to 0.22 to fix below.
1. Fixed intel DTS load fan table issue. #
;+------------------------------------------------------------------------
;
; Date : 02/05/'07
; ZD1 BIOS Ver. : v0.2403
; Z01 BIOS Ver. : v0.2402
; ZD1 EC Version: 0.021
; Z01 EC Version: 0.021
; Z01 IGD BIOS : 1410
;
1. Update code for Power Management Checklist R2.0
base\usb\usbinit.asm
intel.600\pcie\pciecid2.asm
intel.600\gmchpm.asm
zd1.tc3\bcp.asm (set to AUTO for the PCIE don't support hot plug)
z01.tc3\bcp.asm (set to AUTO for the PCIE don't support hot plug)
2. Update CPU FSB in DMI
common\oemcomm.asm (add oemGetCpuFsb)
3. Update code
feats\nbm\nbminit.asm
zd1.tc3\flahsint.asm (support projects name checked)
z01.tc3\flahsint.asm (support projects name checked)
for Z01:
1. Configure IGD vbios 1410.
1.Set "Use DOD = 00000110h ID for Primary LFP" to Disable.
2.Set Panel #14 Backlight Control Parameters Inverter Polarity to "Normal".
2. Change IGD backlight power on default to "0C0h" and Remove Backlight
programming reversed.
z01.tc3\bright.asm
;+------------------------------------------------------------------------
;
; Date : 02/02/'07
; ZD1 BIOS Ver. : v0.2402
; Z01 BIOS Ver. : v0.2401
; ZD1 EC Version: 0.021
; Z01 EC Version: 0.021
; Z01 IGD BIOS : 1410
;
1. Upgrade Kernal Codes from 1.18 to 1.19
bus\bridg\intel\ich8\spides2p.asm
bus\bridg\intel\ich8\spidesc1.asm
bus\bridg\intel\ich8\spidesc2.asm
bus\bridg\intel\ich8\spidesc4.asm
bus\bridg\intel\ich8\spidesc5.asm
bus\bridg\intel\ich8\spidesc6.asm
bus\bridg\intel\ich8\spidesc8.asm
bus\bridg\intel\ich8\spiflash.asm
chipset\intel\crestline\memory\bb_init.bin
chipset\intel\crestline\memory\bwg32b.inc
chipset\intel\crestline\memory\carinit.asm
chipset\intel\crestline\memory\cpumem.inc
chipset\intel\crestline\memory\meminit.bin
chipset\intel\crestline\memory\mrcmem.inc
chipset\intel\crestline\memory\pm32.asm
chipset\intel\crestline\memory\version.lst
chipset\intel\crestline\grfxinit.asm
chipset\intel\crestline\memhole.asm
chipset\intel\crestline\memsize.asm
include.600\newflash.inc
add pnpnvs\flashpro\algorthm.001\erase47.asm
pnpnvs\flashpro\algorthm.001\spieras1.asm
pnpnvs\flashpro\algorthm.001\spieras2.asm
pnpnvs\flashpro\algorthm.001\spieras3.asm
pnpnvs\flashpro\algorthm.001\spiprog1.asm
pnpnvs\flashpro\algorthm.001\spisen1.asm
pnpnvs\flashpro\algorthm.001\spisen2.asm
pnpnvs\flashpro\algorthm.001\make.amk
add pnpnvs\flashpro\algorthm.001\spisen3.asm
add pnpnvs\flashpro\algorthm.001\spisen4.asm
add pnpnvs\flashpro\algorthm.001\spiprog3.asm
add pnpnvs\flashpro\algorthm.001\spiread.asm
smp\intel\crestline\common\oem.inc
add smp\intel\crestline\common.tc3\igbewa.asm
smp\intel\crestline\common.tc3\make.mak
smp\intel\crestline\common.tc3\postb.asm
smp\intel\crestline\common.tc3\usbinit.asm
smp\intel\crestline\crb.tc3\bcp.asm
smp\intel\crestline\crb.tc3\make.mak
smp\intel\crestline\intel.600\acpi\asl\ec.asl
smp\intel\crestline\intel.600\acpi\asl\host_bus.asl
smp\intel\crestline\intel.600\acpi\asl\video.asl
smp\intel\crestline\intel.600\amt\override\asf.asm
smp\intel\crestline\intel.600\amt\override\intrface.asm
smp\intel\crestline\intel.600\amt\override\ostimer.asm
smp\intel\crestline\intel.600\amt\amt.asm
smp\intel\crestline\intel.600\amt\mebx_imb.bin
smp\intel\crestline\intel.600\igdoprn\igdoinit.asm
smp\intel\crestline\intel.600\igdoprn\igdoinit.inc
smp\intel\crestline\intel.600\igdoprn\igdoprn.asl
smp\intel\crestline\intel.600\pcie\pciecid1.asm
smp\intel\crestline\intel.600\clock.inc
smp\intel\crestline\intel.600\initestk.asm
smp\intel\crestline\intel.600\initlstk.asm
smp\intel\crestline\intel.600\intcregs.inc
smp\intel\crestline\intel.600\smionslp.asm
smp\intel\crestline\setup\cpu\thrmen.asm
oem.twn\base\bus\spiflash.asm
oem.twn\common\oem.inc
oem.twn\base\post\postb.asm
oem.twn\base\usb\usbinit.asm
oem.twn\zd1.tc3\bcp.asm
oem.twn\z01.tc3\bcp.asm
oem.twn\append\asl\host_bus.asi
oem.twn\append\asl\video.asi
oem.twn\intel.600\amt\override\asf.asm
oem.twn\intel.600\amt\override\intrface.asm
oem.twn\intel.600\amt\override\ostimer.asm
oem.twn\intel.600\amt\amt.asm
oem.twn\intel.600\amt\mebx_imb.bin
oem.twn\intel.600\igdoprn\igdoinit.asm
oem.twn\intel.600\igdoprn\igdoinit.inc
oem.twn\append\asl\igdoprn.asi
oem.twn\intel.600\pcie\pciecid1.asm
oem.twn\intel.600\clock.inc
oem.twn\intel.600\initestk.asm
oem.twn\intel.600\initlstk.asm
oem.twn\intel.600\intcregs.inc
oem.twn\intel.600\smionslp.asm
For ZD1
2. Change to intel chipset default MEMINIT.bin for B2 board.
zd1.tc3\make.mak
;+------------------------------------------------------------------------
;
; Date : 02/01/'07
; ZD1 BIOS Ver. : v0.2310
; Z01 BIOS Ver. : v0.2307
; ZD1 EC Version: 0.021
; Z01 EC Version: 0.021
; Z01 IGD BIOS : 1410
;
1. Update code
append\asl\lid.asi
append\wb_cir\wb_cir.asm
common\intelnv.asm (modify cmosRpxAspm & cmosPegAspm)
zd1.tc3\bcp.asm (mask bcpiPPciSerrDflt = ENABLED)
z01.tc3\bcp.asm (mask bcpiPPciSerrDflt = ENABLED)
2. Support hard disk password
append\hddpswd\*.*
zd1.tc3\make.mak (add PLATFORM=)
zd1.tc3\template.asm (add items to securityMenu)
zd1.tc3\strings.scr (add hddpwd.str)
3. Fix the system hangs when initializing WB8769 if 4G memory installed
zd1.tc3\bcp.asm (unmask INSTALL_MEMHLE & MAKE_BCP_MEMHOLE)
for ZD1
1. Update EC to 0.21 to fix below
1. Fixed set brightness command issue. #
2. Fixed Query Q-event command lost SCI issue. #
2. Support Vista Brightness Control
append\asl\globlnvs.asi (add BRTN & BOWN)
append\asl\vga_lcd.asi
append\asl\vide.asi (mask Method BRTN)
append\asl\wmi_oem.asi (add path for PEGA)
append\asl\wmi_q.asi (Modify Q8E & Q8F)
zd1.tc3\qci_inc.asi (enable BRIGHTNESS_VISTA)
for Z01
1. Update EC to 0.21 to fix below
1. Fixed set brightness command issue. #
2. Fixed Query Q-event command lost SCI issue. #
2. Change IGD bios from 1382 to 1410.
1. Disable Signon message.
2. Enable LFP as Primary Device.
3. Disable Rotate Function
4. Enable EDID Persistence for Restore Mode.
5. Set Select Panel type from PANEL #3 to PANEL #14.
6. Enable LFP EDID support.
;+------------------------------------------------------------------------
;
; Date : 01/29/'07
; ZD1 BIOS Ver. : v0.2309
; Z01 BIOS Ver. : v0.2306
; ZD1 EC Version: 0.021A
; Z01 EC Version: 0.021A
; Z01 IGD BIOS : 1382
;
1. Fix LID function status report incorrect.
append\asl\lid.asl
2. Fix AL268 AZALIA codec on Vista DTM test fail issue.
z01.tc3\hda_oem.asm
zd1.tc3\hda_oem.asm
3. Fix the bios build date year data incorrect in Windows "System Information"
issue.
common\dmioem.asm
base\smbios.600\bioshnd2.asm
base\smbios.600\make.mak
for ZD1:
1. Change back meminit.rom for B1 board.
zd1.tc3\make.mak
2. Update some code.
zd1.tc3\bcp.asm(add back OEM_OPROM_BUFFER_SEG, set cmosDTSCalibrate)
3. Change EC bios to v0.021A to fix below.
1. Fixed battery LED keep on when AC plug-out in system shutdown. #
2. Fixed touchpad not turn on backlight when touchpad move in back #
light off mode. #
3. enable acer auto dim function. #
4. change brightness level from 16 step to 10 step.
for Z01:
1. Fix the POST message bar under ACER logo will always show "....(F12)..."
even "F12 Boot Menu" set to Disabled.
z01.tc3\gui\setup1.ima,setup4.ima(exchanged)
z01.tc3\bcp.asm(remove INSTALL_GUI Resume_MSG).
2. Change EC bios to v0.021A to fix below.
1. Fixed battery LED keep on when AC plug-out in system shutdown. #
2. Fixed touchpad not turn on backlight when touchpad move in back #
light off mode. #
3. enable acer auto dim function. #
4. change brightness level from 16 step to 10 step.
;+------------------------------------------------------------------------
;
; Date : 01/26/'07
; ZD1 BIOS Ver. : v0.2401
; Z01 BIOS Ver. : v0.2305
; ZD1 EC Version: 0.020
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
For ZD1 B2 board.
1. Change to intel chipset default MEMINIT.bin for B2 board.
zd1.tc3\make.mak
;+------------------------------------------------------------------------
;
; Date : 01/23/'07
; ZD1 BIOS Ver. : v0.2308
; Z01 BIOS Ver. : v0.2305
; ZD1 EC Version: 0.020
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
1. Update code for CIR
append\asl\lpcb.asi
append\asl\wb_cir.asi (add _PRS)
append\wb_cir\wb_cir.asm (add LOW to RESTORE_CONFIG &
add clc to pmCirInitSmm)
2. Update code
zd1.tc3\bcp.asm (modif cmosGfxVideoRepost)
zd1.tc3\oemcode.asm (modify oemCheckPcieDeviceSmm to clear the resources
of PCIE devices)
z01.tc3\bcp.asm (modif cmosGfxVideoRepost)
z01,tc3\oemcode.asm (modify oemCheckPcieDeviceSmm to clear the resources
of PCIE devices)
3. Fix DTS function doesn't work issue.
zd1.tc3\oem_dts.asm
z01.tc3\oem_dts.asm
4. Remove post_code 0d2h output port80h for check black screen debug.
base\core\compat3.asm
base\core\make.mak
base\bootblok\intrhndl.asm
base\bootblok\make.mak
For ZD1
1. Update EC bios to zd1_020.bin for fix below.
1. set LAN power default on state .
2. Fixed NXM power on/off timer issue.
3. Try to fix volume wheel show "0"/"1" in DOS mode.
;+------------------------------------------------------------------------
;
; Date : 01/19/'07
; ZD1 BIOS Ver. : v0.2307
; Z01 BIOS Ver. : v0.2304
; ZD1 EC Version: 0.018
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
1. ZD1 version update (Codes as 2306).
;+------------------------------------------------------------------------
;
; Date : 01/19/'07
; ZD1 BIOS Ver. : v0.2306
; Z01 BIOS Ver. : v0.2304
; ZD1 EC Version: 0.018
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
1. Fix S3 resumes failed after configuring VGA SVID & SSID
append\subid\oemsubid.asm
2. Mask the code un-needed
base\miser\sbacpis3.asm
3. Turn on backlight when S3 resumes
common\oemcomm.asm (add WAKE_FROM_S3, turnBacklightOn)
4. Update NBM boot sequence
feats\nbm\hand9610.asm (modify biosBootSequenceTbl)
5. Temporary turn off legacy USB 2.0 support for some different kind USB flash
Disk can not be detected.
base\usb\bndehci.asm
base\usb\make.mak
for ZD1
1. Configure TV card SVID & SSID
zd1.tc3\oem_tv.asm
;+------------------------------------------------------------------------
;
; Date : 01/18/'07
; ZD1 BIOS Ver. : v0.2305
; Z01 BIOS Ver. : v0.2303
; ZD1 EC Version: 0.018
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
for ZD1
1. Don't configure SVID and SSID to VGA chip to fix S3 resumes failed
append\subid\oemsubid.asm
;+------------------------------------------------------------------------
;
; Date : 01/18/'07
; ZD1 BIOS Ver. : v0.2304
; Z01 BIOS Ver. : v0.2303
; ZD1 EC Version: 0.018
; Z01 EC Version: 0.020
; Z01 IGD BIOS : 1382
;
1. Disable Clock Run
common\intelnv.asm (modify cmosClockRunEnable)
2. Park SATA hard disk when reboot
common\oemcomm.asm (add oemSleepSataDevJ)
common\warmrst.asm (call oemSleepSataDevJ)
3. Correct the bios boot devices sequence number and corrrect set boot sequence
in Preload function and also correct FDD flag for PXE download.
zd1.tc3\bcp.asm
z01.tc3\bcp.asm
feats\preload\handler.asm
append\fddless\fddless.asm
for ZD1:
1. Update EC to 0.18 to fix below
1. Fixed DOS and over 4 sec power not turn off issue. #
2. Remove RAID supported
zd1.tc3\bcp.asm (remove PCI_SCSI from MULTIBOOT_XP_CLASS_START,
remove PCI_SCSI from DEFAULT_BOOT_SEQUENCE,
remove CONV_USBDATA from INSTALL_USB,
unmask OEM_OPROM_BUFFER_SEG,
unmask OEM_USBFUNNYSEG_UMB_SEG)
zd1.tc3\make.mak (remove oem_raid.asm)
zd1.tc3\template.asm (remove SCSI node)
for Z01
Upgrade to ZD12303)
1. Hiden the IGD memory selection in bios setup when PCIE VGA installed.
base\chipset\memtot.asm
base\chipset\make.mak
2. Align the "Total Griphics Memory:" string.
common\common.str
zd1.tc3\strings.scr
z01.tc3\strings.scr
3. Correct the SRV32 function number to fix audio no sound issue.
append\asl\ec.asi
append\asl\qci_comm.asi
4. Get CPU themal offset
append\asl\ec.asi
common\merom.asm
5. Define DTS and enable
append\asl\ec.asi
append\asl\globlnvs.asi
append\asl\gpe.asi (modify _L02)
append\asl\platform.asi
append\asl\ptswak.asi
zd1.tc3\qci_inc.asi (enable DTS)
6. Support LID
append\asl\ich8.asi (add SLID and LIDP)
append\asl\lid.asi
append\asl\main.asl (unmask lid.asi)
7. Set S4 flasg and flash LED when S4
append\asl\main.asl (add nv1_cmos.asi)
append\asl\ptswak.asi
8. Update WOL status when S3
append\asl\ptswak.asi
9. Update bluetooth and WALN status when resuming from S3 and S4
append\asl\ptswak.asi
10. Support wide acer LOGO and OSB. Update correct string
base\gui\uipost.asm (add to call oemCheckBArMessageFar)
z01.tc3\gui\acer_ws2.jpg
z01.tc3\gui\script.txt
z01.tc3\gui\setup1.ima
z01.tc3\gui\setup3.ima
z01.tc3\gui\setup4.ima
z01.tc3\bcp.asm (modify INSTALL_GUI)
z01.tc3\oem_gui.asm (add oemCheckBArMessageFar)
11. Change EC bios to 0.20 to fix below:
1. Fixed DOS and over 4 sec power not turn off issue. #
2. Add skip error data from smart battery. #
3. Modify fan table. #
;+------------------------------------------------------------------------
;
; Date : 01/17/'07
; ZD1 BIOS Ver. : v0.2303
; EC Version : 0.018a
;
1. Get CPU themal offset
append\asl\ec.asi
common\merom.asm
2. Define DTS and enable
append\asl\ec.asi
append\asl\globlnvs.asi
append\asl\gpe.asi (modify _L02)
append\asl\platform.asi
append\asl\ptswak.asi
zd1.tc3\qci_inc.asi (enable DTS)
3. Support LID
append\asl\ich8.asi (add SLID and LIDP)
append\asl\lid.asi
append\asl\main.asl (unmask lid.asi)
4. Support PNPID for Synaptics
append\asl\lpcb.asi (modify Device(PS2M))
5. Set S4 flasg and flash LED when S4
append\asl\main.asl (add nv1_cmos.asi)
append\asl\ptswak.asi
6. Update WOL status when S3
append\asl\ptswak.asi
7. Update bluetooth and WALN status when resuming from S3 and S4
append\asl\ptswak.asi
8. Update code
append\asl\qci_comm.asi
9. Support SCSI SETUP node
feats\node\hd0m_s.asm
feats\node\node.str
feats\node\scsihdd0.asm
feats\node\scsihdd1.asm
zd1.tc3\template.asm (add SCSI node)
10. Remove the code un-need
intel.600\apmlv2.asm (mask igdBlcInit)
11. Support wide acer LOGO and OSB. Update correct string
base\gui\uipost.asm (add to call oemCheckBArMessageFar)
zd1.tc3\gui\acer_ws2.jpg
zd1.tc3\gui\script.txt
zd1.tc3\gui\setup1.ima
zd1.tc3\gui\setup3.ima
zd1.tc3\gui\setup4.ima
zd1.tc3\bcp.asm (modify INSTALL_GUI)
zd1.tc3\oem_gui.asm (add oemCheckBArMessageFar)
12. Fix PxE ROM cannot initialize when RAID ROM enabled
zd1.tc3\bcp.asm (add CONV_USBDATA to INSTALL_USB to free E000 space)
13. RAID enabled when two SATA hard disk installed
zd1.tc3\oem_raid.asm
14. Update EC to 0.18a
15. Update VGA SSID and SVID
append\subid\*.*
;+------------------------------------------------------------------------
;
; Date : 12/17/'06
; Z01 BIOS Ver. : v0.2302
; EC Version : 0.020A
;
1. Fix LCD device will dissapear under windowss XP/VISTA.
intel.600\igdoprn\igdoinit.inc (Set opregion_ver to 0100h)
2. Add back Intel Backlight Init at Level2 initial and Invert backlight level
value before programming int10h ax=5f61.
intel.600\apmlvl2.asm
intel.600\igdmisc.asm
;+------------------------------------------------------------------------
;
; Date : 12/16/'06
; Z01 BIOS Ver. : v0.2301
; EC Version : 0.020A
;
1. First release in Phoenix BIOS
;+------------------------------------------------------------------------
;
; Date : 01/16/'07
; ZD1 BIOS Ver. : v0.2302
; EC Version : 0.017
;
1. Fix the system mute when booting to Windows.
append\asl\ac.asi (add W2K)
append\asl\qci_com.asi (modify table to match SRV32)
2. Support new card hot plug
append\asl\gpe.asi (modify _L01)
append\asl\main.asl (unmask gpe.asi)
append\asl\pcieprt1.asi (add DEVICE(PXSX))
commom\oemcomm.asm (add oemConfigPcieBusNumber4HotPlugFar)
zd1.tc3\oemcode.asm (add oemConfigPcieBusNumber4HotPlugFar)
3. Support audio codec 888
zd1.tc3\hda_oem.asm
;+------------------------------------------------------------------------
;
; Date : 01/15/'07
; ZD1 BIOS Ver. : v0.2301
; EC Version : 0.017
;
1. First release in Phoenix BIOS